Can I transfer data scanned from ScanSnap Connect Application to ScanSnap Home for iOS/Android?

Yes, you can transfer data during or after the initial setup of ScanSnap Home for iOS/Android.
For details, refer to the following [Procedure]:
Note: Android OS is used in the following example, but the same procedure is applicable for iOS.

[Procedure]

If you are already using ScanSnap Home for iOS/Android, refer to here.

If you have not installed ScanSnap Home for iOS/Android

1. Install ScanSnap Home for iOS/Android from here.
   
   
2. Set up the target scanner.
   
   
3. When the [Data Migration] screen appears, tap the [Migrate] button.
   
   
   
4. When the [Data Migration] screen appears, leave the screen open until data migration is complete.
   Note: Do not perform any other operations and be careful not to accidentally close the screen.
   
   
   
5. The message "Data migration completed successfully" will appear.
   
   
   

If you are already using ScanSnap Home for iOS/Android

1. Open ScanSnap Home for iOS/Android .
   
   
2. Tap [] on the upper left corner.
   
   
   
3. Tap [Settings].
   
   
   
4. Tap [Data Migration].
   
   
   
5. Tap the [Migrate] button.
   
   
   
6. When [Migrating data] appears, leave the screen open until data migration is complete.
   Note: Do not perform any other operations and be careful not to accidentally close the screen.
   
   
   
7. The message "Data migration completed successfully" will appear.