Skip to main content

How can I use Quick Menu on ScanSnap Home? (Every time I scan, I want to select an application to link with scanned image.）

  • Updated

Follow the steps below to use Quick Menu (*) on ScanSnap Home.

(*) Quick Menu is the window below that appears after a scan allowing you to select an application that runs for content date record created by scanning document.

Quick Menu requires ScanSnap Home 1.7.0 or later.

Windows®
ssh-once14-01_tcm100-5129853_tcm100-2750236-32.png

 

macOS
ssh-once14-02_tcm100-5129854_tcm100-2750236-32.png

 

Follow the steps for your OS, as the steps varies depending on OS.

 

Windows®

Use any of the following to turn on Quick Menu.

 

Creating a new profile that runs Quick Menu

  1. Click the [Scan] button in the Main Window of ScanSnap Home to display the Scan Window.
  2. Clickssh-add_tcm100-5129868_tcm100-2750236-32.pngto display the [Add new profile] Window.
  3. Select the [Quick Menu] template profile from the template list on the left side of the window.
    ssh-once14-03_tcm100-5129855_tcm100-2750236-32.png
  4. Click the [Add] button.



Modifying an existing profile to use Quick Menu

  1. Click the [Scan] button in the Main Window of ScanSnap Home to display the Scan Window.
  2. Clickssh-edit_tcm100-5129869_tcm100-2750236-32.pngto display the [Edit profiles] Window.
  3. Select a profile for which you modify the settings from the profile list.
  4. Select [Quick Menu] for [Send to], and click [Save] button.
    ssh-once14-04_tcm100-5129856_tcm100-2750236-32.png


Migrating scan settings for ScanSnap Manager to use Quick Menu

When Quick Menu was enabled on ScanSnap Manager(*) before ScanSnap Home is installed, you can refer to this page and migrate the scan settings for ScanSnap Manger, which will automatically create a new profile where Quick Menu is enabled.

* ScanSnap Manager for Windows V5.1 or later is required.

macOS

Use any of the following to turn on Quick Menu.


Creating a new profile that runs Quick Menu

  1. Click the [Scan] button in the Main Window of ScanSnap Home to display the Scan Window.
    If the main window is not already displayed, click the [ScanSnap Home] iconssh-icon_tcm100-5129867_tcm100-2750236-32.pngin the application list that appears when you click Launchpad in the Dock.
  2. Clickssh-add_tcm100-5129868_tcm100-2750236-32.pngto display the [Add new profile] Window.
  3. Select the [Quick Menu] template profile from the template list on the left side of the window.
    ssh-once14-05_tcm100-5129857_tcm100-2750236-32.png
  4. Click the [Add] button.


Modifying an existing profile to use Quick Menu

  1. Click the [Scan] button in the Main Window of ScanSnap Home to display the Scan Window.
    If the main window is not already displayed, click the [ScanSnap Home] iconssh-icon_tcm100-5129867_tcm100-2750236-32.pngin the application list that appears when you click Launchpad in the Dock.
  2. Clickssh-edit_tcm100-5129869_tcm100-2750236-32.pngto display the [Edit profiles] Window.
  3. Select a profile for which you modify the settings from the profile list.
  4. Select [Quick Menu] for [Send to], and click [Save] button.
    ssh-once14-06_tcm100-5129864_tcm100-2750236-32.png


Migrating scan settings for ScanSnap Manager to use Quick Menu

When Quick Menu was enabled on ScanSnap Manager(*) before ScanSnap Home is installed, you can refer to this page and migrate the scan settings for ScanSnap Manger, which will automatically create a new profile where Quick Menu is enabled.

 

* ScanSnap Manager for Mac V3.2 or later is required.

F[iX1300], F[iX1600], F[iX1500], F[iX1400], F[iX100], F[SV600], F[iX500], F[S1100i], F[S1300i],
Was this article helpful?
1 out of 2 found this helpful
Return to top

Related articles