How can I find the MAC address of my ScanSnap? – ScanSnap FAQ | Global

Check the MAC address in the following procedure:

Preparation

<ScanSnap iX1600 / iX1500>

These models can be confirmed without connecting to the computer.
Refer to:
ScanSnap Help
(Select the model name of the ScanSnap at the top of the page)

<ScanSnap iX1300 / iX500>

Turn on the Wi-Fi switch that is at the back of the scanner.
Connect the computer that has ScanSnap Home installed and the ScanSnap iX1300 / iX500 with the attached USB cable. Then, open the ADF paper chute (cover) to turn the ScanSnap on.

<ScanSnap iX100>

Turn on the Wi-Fi switch that is at the back of the scanner.
Connect the computer that has ScanSnap Home installed and the ScanSnap iX100 with the attached Micro-USB cable. Then, bring the feed guide down toward you to turn the ScanSnap on.

Select your operating system from the options below.

Click Windows [Start] menu > [ScanSnap] > [ScanSnap Home].

The main window of ScanSnap Home appears.
Click the [Settings] menu and select [Preferences].

The [Preferences] window appears.
Click the [Scanner] tab and select a model from the [Scanner information] list.
Make sure that the connection type is set to [USB] and click the [Wireless setup] button.

ScanSnap Wireless Setup Tool starts.
Click the [ScanSnap Information] button in the [Basic] tab.

The [ScanSnap Information] window appears.
[Network information] can be used to check the MAC address.
After checking the MAC address, click [OK] to exit ScanSnap Wireless Setup Tool.

Click Finder in the Dock.

The Finder window appears.
Click the [ScanSnap Home] icon in the list of applications to start ScanSnap Home.

The main window of ScanSnap Home appears.
On the right of the Apple mark, select [ScanSnap Home] - [Preferences].
The [Preferences] window appears.
Click the [Scanner] tab and select a model from the [Scanner information] list.
Make sure that the connection type is set to [USB] and click the [Wireless setup] button.
The [ScanSnap Wireless Setup Tool] window appears.
Click the [ScanSnap Information] button in the [Basic] tab.

The [ScanSnap Information] window appears.
[Network information] can be used to check the MAC address.
After checking the MAC address, click [OK] to exit ScanSnap Wireless Setup Tool.

Related articles